TWO-COMPONENT EPOXY SEALER

Product Code: RTB-750

Download:

TDS MSDS MSDS
Segment
Protective and Industrial
Type
Primer, Sealer
Type of Binder
Epoxy - Polyamide
Application
Anti-Corrosive
Substrate
Concrete, Wood

Special two-component epoxy sealer with excellent adhesion and sealing properties.

  • Recommended Uses
    Can be used as a first coat for epoxy coating systems on concrete surfaces or as a non-pigmented epoxy clear coating in a multi-layer clear coating system.
  • Type of Binder
    Epoxy – Polyamide
    Number of Component(s)
    2 Components
    Curing Mechanism
    Chemical Reaction
    Solid Content After Mixing
    45 ± 1% By Weight
    36 ± 1 % By Volume
    Flash Point
    28°C (82°F)
  • Finish / Colour
    Gloss | Clear
    Specific Gravity After Mixing
    0.98 ± 0.05 gr/cm³
  • Packing
    Component A (Epoxy): 20 L|Component B (Hardener): 10 L
    Storage Conditions
    To be stored in cool and dry conditions in original sealed containers.
    Shelf Life
    At least 18 months after delivery.
    Safety
    This product contains organic solvents and flammable materials. Keep away from sparks, fires, electrical cables and equipment, direct sunshine and out of children’s reach.
    Protect skin, eyes, and avoid prolonged breathing of solvent vapor during application. Use with adequate ventilation .

Technical Support Procedures and Guides

Technical Guide/Procedure Code and Name Download
TP-9101-18 - Surface Preparation for Expired Recoating Interval
This procedure document provides guidelines and instructions to follow in the event that the recoating interval between the application of different layers has expired, helping to ensure that strong bonding between the layers is achieved.
TP-9102-18 - Repair and Touch-Up Procedures
This procedure document provides guidelines and instructions to follow when repairing and touching up coatings, helping to ensure a prolonged service life for coatings that may have been damaged during installation and pre-commissioning, or during their service life.
TG-9902-18 - Surface Preparation Guide
This guide compares typical surface preparation standards such as Swedish Standards (SIS-5900), National Association of Civil Engineers (N.A.C.E.), American Standards (SSPC), Japanese Standards (SPSS), and British Standards (BS-5934). This guide also explains typical surface preparation requirements for different substrates based on different applications.
TG-9903-18 - Effect of Ambient Conditions on Dew Point
This guide provides a reference table that shows the relationship between Dew Point and relative humidity and ambient temperature, as well as a formula to calculate Dew Point for other values.
TG-9904-18 - Airless and Conventional Spray Application Parameters
This guide provides general information on application parameters when using conventional and airless spray application systems.
TG-9905-18 - Correlation Between Wet and Dry Film Thickness
This guide provides a reference table that quickly converts Dry Film Thickness (DFT) requirements to West Film Thickness (WFT) requirements based on a coating's Solid Content percentage.
TP-9301-18 - Surface Preparation and Coating Application on Concrete Substrates
This procedure document provides guidelines and instructions to assist users in surface preparation of concrete substrates, as well as application of floor coating systems.