RONASS VINYL COATING

Product Code: RTB-1224

Download:

TDS
Segment
Marine and Off-Shore
Type
Finish Coat, Intermediate
Type of Binder
Vinyl
Application
Anti-Corrosive, Coastal Environments, Humid Environments, Mild Environments, Polluted Environments
Substrate
Concrete, Metal, Steel

Special one-component, high-performance vinyl coating with excellent outdoor stability, humidity resistance and anti-corrosive properties.

  • Recommended Uses
    Intermediate and top-coat for maintenance operations, metal and concrete surfaces in marine atmospheres and industrial areas.
    Suitable Primers
    RTB-1214 (Ronass Vinyl Primer) or other suitable epoxy primers.
  • Type of Binder
    Polyvinyl Co-Polymers
    Number of Component(s)
    1 Component
    Curing Mechanism
    Solvent Evaporation
    Solid Content
    65 ± 1% By Weight
    48 ± 2% By Volume
    Flash Point
    28°C (82°F)
  • Finish / Colour
    Semi-gloss | Wide range available according to RAL colour systems
    Specific Gravity
    1.25 ± 0.05 gr/cm³
  • Packing
    10 L|20 L
    Storage Conditions
    To be stored in cool and dry conditions in original sealed containers.
    Shelf Life
    At least 24 months after delivery.
    Safety
    This product contains organic solvents and flammable materials. Keep away from sparks, fires, electrical cables and equipment, direct sunshine and out of children’s reach.
    Protect skin, eyes, and avoid prolonged breathing of solvent vapor during application. Use with adequate ventilation .

Technical Support Procedures and Guides

Technical Guide/Procedure Code and Name Download
TP-9101-18 - Surface Preparation for Expired Recoating Interval
This procedure document provides guidelines and instructions to follow in the event that the recoating interval between the application of different layers has expired, helping to ensure that strong bonding between the layers is achieved.
TP-9102-18 - Repair and Touch-Up Procedures
This procedure document provides guidelines and instructions to follow when repairing and touching up coatings, helping to ensure a prolonged service life for coatings that may have been damaged during installation and pre-commissioning, or during their service life.
TG-9902-18 - Surface Preparation Guide
This guide compares typical surface preparation standards such as Swedish Standards (SIS-5900), National Association of Civil Engineers (N.A.C.E.), American Standards (SSPC), Japanese Standards (SPSS), and British Standards (BS-5934). This guide also explains typical surface preparation requirements for different substrates based on different applications.
TG-9903-18 - Effect of Ambient Conditions on Dew Point
This guide provides a reference table that shows the relationship between Dew Point and relative humidity and ambient temperature, as well as a formula to calculate Dew Point for other values.
TG-9904-18 - Airless and Conventional Spray Application Parameters
This guide provides general information on application parameters when using conventional and airless spray application systems.
TG-9905-18 - Correlation Between Wet and Dry Film Thickness
This guide provides a reference table that quickly converts Dry Film Thickness (DFT) requirements to West Film Thickness (WFT) requirements based on a coating's Solid Content percentage.
TP-9301-18 - Surface Preparation and Coating Application on Concrete Substrates
This procedure document provides guidelines and instructions to assist users in surface preparation of concrete substrates, as well as application of floor coating systems.