RONASS ANTI-DUST FLOOR COATING Product Code: RTB-741 Download: TDS Segment Protective and Industrial Type Floor Coating, Single Coating System Type of Binder Chlorinated Rubber Application Abrasion-Resistant Substrate Concrete RTB-741 is a product based on Chlorinated Rubber resin, designed to reduce the accumulation of dust on concrete surfaces, walls and floors of sensitive areas such as control rooms where industrial and highly technical equipment may be installed. This coating exhibits exceptional resistance to humidity and abrasion and allows for excellent adhesion to concrete and asphalt substrates. USES AND SUITABLE PRIMERS/TOP-COATS Recommended Uses Primer, intermediate and finish coat for concrete surfaces and floor coating systems. Suitable Primers RTB-750 (Two-Component Epoxy Sealer) and RTB-788 (Ronass Epoxy Pink Putty). CHEMICAL COMPOSITION Type of Binder Chlorinated Rubber Resin Number of Component(s) 1 Component Curing Mechanism Solvent Evaporation Solid Content After Mixing 70 ± 1% By Weight50 ± 2 % By Volume Flash Point --- PHYSICAL PROPERTIES Finish / Colour Semi-flat | Wide range available according to RAL colour system Specific Gravity 1.40 ± 0.05 gr/cm³ PACKING, STORAGE AND SAFETY Packing 20 L Storage Conditions To be stored in cool and dry conditions within the temperature range of +5°C minimum and +40°C maximum in original sealer containers. Shelf Life At least 18 months after delivery. Safety This product contains organic solvents and flammable materials. Keep away from sparks, fires, electrical cables and equipment, direct sunshine and out of children’s reach.Protect skin, eyes, and avoid prolonged breathing of solvent vapor during application. Use with adequate ventilation . Technical Support Procedures and Guides Technical Guide/Procedure Code and Name Download TP-9101-18 - Surface Preparation for Expired Recoating IntervalThis procedure document provides guidelines and instructions to follow in the event that the recoating interval between the application of different layers has expired, helping to ensure that strong bonding between the layers is achieved. TP-9102-18 - Repair and Touch-Up ProceduresThis procedure document provides guidelines and instructions to follow when repairing and touching up coatings, helping to ensure a prolonged service life for coatings that may have been damaged during installation and pre-commissioning, or during their service life. TG-9902-18 - Surface Preparation GuideThis guide compares typical surface preparation standards such as Swedish Standards (SIS-5900), National Association of Civil Engineers (N.A.C.E.), American Standards (SSPC), Japanese Standards (SPSS), and British Standards (BS-5934). This guide also explains typical surface preparation requirements for different substrates based on different applications. TG-9903-18 - Effect of Ambient Conditions on Dew PointThis guide provides a reference table that shows the relationship between Dew Point and relative humidity and ambient temperature, as well as a formula to calculate Dew Point for other values. TG-9904-18 - Airless and Conventional Spray Application ParametersThis guide provides general information on application parameters when using conventional and airless spray application systems. TG-9905-18 - Correlation Between Wet and Dry Film ThicknessThis guide provides a reference table that quickly converts Dry Film Thickness (DFT) requirements to West Film Thickness (WFT) requirements based on a coating's Solid Content percentage. TP-9301-18 - Surface Preparation and Coating Application on Concrete SubstratesThis procedure document provides guidelines and instructions to assist users in surface preparation of concrete substrates, as well as application of floor coating systems.