RONASS BAKING ENAMEL

Product Code: RTB-825

Download:

TDS
Segment
Protective and Industrial
Type
Finish Coat, Single Coating System
Type of Binder
Thermosetting Acrylic
Application
Baking Enamel
Substrate
Metal, Steel

A single-pack, high-gloss, high performance baking finish coat with excellent adhesion, outdoor stability and anti-corrosive properties.

  • Recommended Uses
    Top-coat or single coating system for electrical and electronic equipment cases, home appliances and industrial products.
  • Type of Binder
    Self-Crosslinking Thermosetting Acrylic Resin
    Number of Component(s)
    1 Component
    Curing Mechanism
    Thermosetting
    Solid Content
    70 ± 1% By Weight
    56 ± 2% By Volume
    Flash Point
    38°C (100°F)
  • Finish / Colour
    Gloss | Wide range available according to RAL colour system
    Specific Gravity
    1.25 ± 0.05 gr/cm³
    Heat Resistance
    Continuous Service: -30°C – 100°C
    Surface Preparation
  • Packing
    20 L
    Storage Conditions
    To be stored in cool and dry conditions in original sealed containers.
    Shelf Life
    At least 12 months after delivery.
    Safety
    This product contains organic solvents and flammable materials. Keep away from sparks, fires, electrical cables and equipment, direct sunshine and out of children’s reach.
    Protect skin, eyes, and avoid prolonged breathing of solvent vapor during application. Use with adequate ventilation .

Technical Support Procedures and Guides

Technical Guide/Procedure Code and Name Download
TP-9101-18 - Surface Preparation for Expired Recoating Interval
This procedure document provides guidelines and instructions to follow in the event that the recoating interval between the application of different layers has expired, helping to ensure that strong bonding between the layers is achieved.
TP-9102-18 - Repair and Touch-Up Procedures
This procedure document provides guidelines and instructions to follow when repairing and touching up coatings, helping to ensure a prolonged service life for coatings that may have been damaged during installation and pre-commissioning, or during their service life.
TG-9902-18 - Surface Preparation Guide
This guide compares typical surface preparation standards such as Swedish Standards (SIS-5900), National Association of Civil Engineers (N.A.C.E.), American Standards (SSPC), Japanese Standards (SPSS), and British Standards (BS-5934). This guide also explains typical surface preparation requirements for different substrates based on different applications.
TG-9903-18 - Effect of Ambient Conditions on Dew Point
This guide provides a reference table that shows the relationship between Dew Point and relative humidity and ambient temperature, as well as a formula to calculate Dew Point for other values.
TG-9904-18 - Airless and Conventional Spray Application Parameters
This guide provides general information on application parameters when using conventional and airless spray application systems.
TG-9905-18 - Correlation Between Wet and Dry Film Thickness
This guide provides a reference table that quickly converts Dry Film Thickness (DFT) requirements to West Film Thickness (WFT) requirements based on a coating's Solid Content percentage.