SPECIAL ZINC-RICH EPOXY PRIMER Product Code: RTB-1180-R Download: TDS MSDS MSDS Segment Protective and Industrial Type Primer, Zinc-Rich Primer Type of Binder Epoxy Application Anti-Corrosive, Cathodic Protection, Coastal Environments, Corrosive Environments, Heavy Duty Protective Coatings, High-Build, Humid Environments, Immersion Service, Polluted Environments, Potable Water Tank Lining, Water Tank Lining, Weldable Substrate Metal, Steel Special high-build, two-component Zinc-rich epoxy coating with excellent adhesion and anti-corrosive properties. USES AND SUITABLE PRIMERS/TOP-COATS Recommended Uses Primer coat for steel structures, maintenance operations, and brushed or sandblasted steel surfaces. Suitable Top-Coats RTB-1180-R can be over-coated with all types of coatings and finishes. CHEMICAL COMPOSITION Type of Binder Epoxy – Polyamide Number of Component(s) 2 Components Curing Mechanism Chemical Reaction Solid Content After Mixing 88 ± 1% By Weight65 ± 3 % By Volume Flash Point 28°C (82°F) Main Pigment(s) Pure Metallic Zinc Powder Zinc Content in Dried Film 80 ± 1% By Weight PHYSICAL PROPERTIES Finish / Colour Flat | Grey PACKING, STORAGE AND SAFETY Packing Component A (Epoxy): 10 L|Component B (Hardener): 4 L Storage Conditions To be stored in cool and dry conditions in original sealed containers. Shelf Life At least 9 months after delivery. Safety This product contains organic solvents and flammable materials. Keep away from sparks, fires, electrical cables and equipment, direct sunshine and out of children’s reach.Protect skin, eyes, and avoid prolonged breathing of solvent vapor during application. Use with adequate ventilation . Technical Support Procedures and Guides Technical Guide/Procedure Code and Name Download TP-9101-18 - Surface Preparation for Expired Recoating IntervalThis procedure document provides guidelines and instructions to follow in the event that the recoating interval between the application of different layers has expired, helping to ensure that strong bonding between the layers is achieved. TP-9102-18 - Repair and Touch-Up ProceduresThis procedure document provides guidelines and instructions to follow when repairing and touching up coatings, helping to ensure a prolonged service life for coatings that may have been damaged during installation and pre-commissioning, or during their service life. TG-9902-18 - Surface Preparation GuideThis guide compares typical surface preparation standards such as Swedish Standards (SIS-5900), National Association of Civil Engineers (N.A.C.E.), American Standards (SSPC), Japanese Standards (SPSS), and British Standards (BS-5934). This guide also explains typical surface preparation requirements for different substrates based on different applications. TG-9903-18 - Effect of Ambient Conditions on Dew PointThis guide provides a reference table that shows the relationship between Dew Point and relative humidity and ambient temperature, as well as a formula to calculate Dew Point for other values. TG-9904-18 - Airless and Conventional Spray Application ParametersThis guide provides general information on application parameters when using conventional and airless spray application systems. TG-9905-18 - Correlation Between Wet and Dry Film ThicknessThis guide provides a reference table that quickly converts Dry Film Thickness (DFT) requirements to West Film Thickness (WFT) requirements based on a coating's Solid Content percentage.